Chimney Relining in Los Angeles County
A continuous stainless liner sized to the appliance, insulated where it needs to be, and terminated properly at the top. The fix for a flue that has failed inside the masonry.
Request Service
Fast, free estimates
Why Chimney Relining Matters
A liner is what stands between the fire and the timber framing of your house, and a large number of chimneys in this county do not have a working one. Anything built here before about 1930 — much of Old Torrance, Uptown Whittier, the Long Beach bungalow neighbourhoods — was commonly built with no liner at all, just brick against brick. Later houses got terracotta tile, which is sound until the ground moves, and the ground here moves. Cracked and displaced tiles are the single most common serious defect we find on camera. The other driver is appliance change. Every gas conversion, every wood stove and every fireplace insert changes the volume and the temperature of what the flue has to carry, and an original masonry flue is nearly always far too large for a modern appliance. An oversized flue runs cool, which condenses acidic moisture inside the chimney and destroys it from within faster than any fire would.
Star Rated
Years Exp.
Chimneys
Available
Benefits of Chimney Relining
A continuous, sealed flue
One unbroken stainless run from the appliance to the top, with no joints for gases to escape through.
Correctly sized to the appliance
A liner matched to what is actually connected, so the flue runs hot enough to draft and not so large that it condenses.
The safe answer for an unlined chimney
Pre-1930 stacks built with no liner get a proper one without rebuilding the masonry.
Required for most inserts and stoves
A new insert or wood stove needs a dedicated liner to be installed to standard and to keep its warranty.
Insulated where it matters
Insulation around the liner keeps flue gases hot, improves draft and cuts creosote formation dramatically.
Restores a chimney rather than replacing it
Relining saves a great many chimneys that would otherwise have to be rebuilt from the firebox up.
Signs You Need This Service
If you notice any of these, it's time to call OakStone Chimney Solutions.
- A camera survey has found cracked, gapped or displaced flue tiles
- Pieces of terracotta tile turn up in the firebox
- The house was built before about 1930 and the flue has never been lined
- You are fitting a wood stove, a fireplace insert or converting to gas
- The flue is visibly far larger than the appliance connected to it
- Smoke or smell appears in a room that does not have the fireplace in it
- Damp patches on the chimney breast on an upper floor
- A previous chimney fire, which frequently cracks tile liners even when nothing else shows
Don't Wait Until It's an Emergency
A flue problem does not improve by being left alone. Chimney Relining booked across Los Angeles County, any hour of the day.
How We Do It
Camera survey first
No liner is quoted without seeing the inside of the existing flue on video.
Measure and size
Flue length and the appliance outlet measured, and the liner diameter calculated rather than guessed.
Clear the way
The flue is swept and any displaced tile or obstruction removed before the liner goes in.
Install the liner
A continuous stainless run lowered through the flue, insulated where the installation calls for it.
Connect and terminate
Sealed to the appliance at the bottom, and finished at the top with a proper top plate and cap.
Test and document
Draft tested, the installation photographed, and the specification written down for your records.
Chimney Relining Questions
You will not know from the hearth, which is the whole problem. It takes a camera survey of the full flue. The usual findings that call for one are cracked or displaced clay tiles, an unlined pre-1930 chimney, or a flue far too large for a newly fitted stove or insert.
A good stainless liner, correctly sized and installed, will typically outlast the appliance it serves. Most carry a long manufacturer warranty. What kills liners early is undersizing, no insulation, or fitting the wrong grade for a gas appliance, since gas condensate is acidic.
Almost always, and by a wide margin. Relining works inside the existing masonry, so it avoids scaffolding a full rebuild and avoids demolishing anything. It is only the wrong answer when the masonry structure itself has failed, not just the flue inside it.
Usually yes. A gas appliance puts far less heat and far more water vapour up a flue that was sized for wood, so it runs cool and condenses. That condensate is acidic and attacks both terracotta and mortar. A correctly specified liner solves it.
Chimney Relining Near You
We provide chimney relining across 15 cities across Los Angeles County.
Explore Our Other Services
From Our Chimney Safety Blog
Ready to Schedule Your Chimney Relining?
Homeowners across Los Angeles County keep our number in their phone for a reason. The line is answered around the clock — call and speak to someone who does this work.
Request Your Free Quote
Available 24/7 for scheduling and emergencies. Reach out and we'll get right back to you.
Contact Details
Lakewood, CA 90712
Business Hours
| Monday | Open 24 hours |
| Tuesday | Open 24 hours |
| Wednesday | Open 24 hours |
| Thursday | Open 24 hours |
| Friday | Open 24 hours |
| Saturday | Open 24 hours |
| Sunday | Open 24 hours |
Send Us a Message
Fill out the form and we'll respond promptly.