(323) 990-9906  ·  5422 Autry Ave, Lakewood, CA
Open 24/7 — free estimates across Los Angeles County
Call Now: (323) 990-9906
Serving Long Beach, CA

Chimney Caps and Crowns in Long Beach, CA

The two details at the top of the chimney that keep water, animals and embers out of it. Both are cheap to do right and expensive to ignore. From the 1920s brick of Belmont Heights to the postwar tracts of Los Altos, with salt air working on every one of them.

Licensed & Insured Available 24/7 Local Long Beach Service

Long Beach Service Request

Fast local response

Protected by spam filtering
5.0
Star Rating
15
Years Experience
6,000+
Chimneys Cleaned
24/7
Local Availability

Chimney Caps and Crowns for Long Beach Homeowners

Long Beach gives us more variety in a single city than the rest of our service area combined. Belmont Heights, Rose Park and the Craftsman streets around Bluff Park went up in the 1910s and 1920s, and a great many of those chimneys were built with no flue liner at all — brick straight against brick, exactly as it was done at the time. Bixby Knolls and California Heights follow in the 1930s and 1940s with terracotta tile, and Los Altos and the east side are postwar tract work with lighter stacks. What connects all of it is the harbour. Salt air coming off the water drives chloride into mortar joints and eats galvanised caps, dampers and flashing at a rate you simply do not see fifteen miles inland. We replace more rusted-through caps in Long Beach than anywhere else we work. The historic district overlays in Belmont Heights and Bluff Park also mean visible exterior masonry work can need design review, which is worth knowing before the scaffolding goes up rather than after.

Unlined 1920s brick near the shore, postwar tile-lined stacks inland, and salt-air corrosion on caps and dampers throughout.

An uncapped flue in Los Angeles County is an open pipe into your house, and it fills up. We pull nesting material out of chimneys here in every month of the year, because the birds and roof rats never get a winter off. The other thing an open flue takes is rain, straight down onto the damper and the smoke shelf, which is why so many dampers in this county are rusted solid. The crown matters just as much and gets thought about far less. A crown is meant to be a sloped, reinforced slab with an overhang and a drip edge that throws water clear of the brick. What most houses actually have is a flat trowelled smear of ordinary mortar, which cracks within a decade and then funnels water into the top of the stack. There is a fire dimension too: in the hillside and canyon parts of this county a spark arrestor screen is not optional, and a great many older chimneys either never had one or have one that has rusted through.

5.0

Star Rated

15

Years Exp.

6,000+

Chimneys

24/7

Available

Neighborhoods We Serve

  • Belmont Heights
  • Bixby Knolls
  • Los Altos
  • Rose Park
  • California Heights
  • Naples

Around Long Beach

  • El Dorado Park
  • Bluff Park
  • The Queen Mary

ZIP Codes Covered

  • 90803
  • 90804
  • 90806
  • 90807
  • 90808
  • 90814
  • 90815
Benefits

Why Long Beach Homeowners Choose Us

Rain kept off the damper and smoke shelf

A capped flue stops the water that rusts dampers solid and soaks the smoke chamber from above.

Animals kept out for good

Mesh sized to keep birds, squirrels and roof rats out of a flue they would otherwise treat as a nesting cavity.

Spark arrestor screen fitted

Embers stopped at the top of the flue, which matters a great deal on hillside and canyon properties.

Stainless steel, not galvanised

Galvanised caps rust out within a few years in this air. Stainless is a one-time job.

Crowns recast with a real overhang

A sloped, reinforced crown with a drip edge that throws water clear of the brickwork, rather than a flat smear that cracks.

Downdraft and rain noise reduced

A correctly sized cap also steadies the draft and stops the rain from drumming down an open flue.

Our Work

Chimney Caps and Crowns on the Job

Real work by our crews in Long Beach and the rest of Los Angeles County.

A technician fitting a black mesh chimney cap onto a painted chimney on a concrete tile roof
Fitting a cap and spark arrestor on a tile roof.
Two newly fitted mesh chimney caps side by side on a red brick chimney with a hillside behind
Twin caps fitted to a two-flue brick chimney.
A technician on a telescoping ladder fitting a cap to the top of a tall red brick chimney
Fitting a cap to a tall brick stack.

Serving All of Long Beach

Fast, professional chimney caps and crowns available 24/7. Call now for a free quote.

Our Process

Our Long Beach Service Process

1

Measure the flue properly

Every flue is measured on the roof. An off-the-shelf cap that nearly fits is a cap that comes off in the first Santa Ana.

2

Assess the crown underneath

There is no point capping a flue that sits in a crown about to fail, so both get looked at together.

3

Remove the old cap and failed crown

Cracked crown material cut back to sound masonry rather than skimmed over.

4

Recast the crown

Reinforced, sloped, with an overhang and a drip edge, and an expansion joint around the flue tile.

5

Fit and secure the cap

Stainless cap fitted and mechanically fixed to the tile or the crown, not sat on friction alone.

6

Photograph the finished top

You get pictures of the top of your own chimney, which is the one part of the house you will never see.

FAQ

Long Beach Chimney Caps and Crowns FAQ

Yes. OakStone Chimney Solutions provides professional chimney caps and crowns throughout Long Beach, CA and the surrounding Los Angeles County area. Call (323) 990-9906 to schedule.

Salt air. Chloride carried off the harbour attacks galvanised steel far faster than it does inland, and the standard galvanised cap fitted on most of these houses has a short life here. We fit stainless as a matter of course in Long Beach, because anything else is a job you will pay for twice.

It is not unusual and it was to the standard of the day, but an unlined masonry flue puts hot gases against brick with the framing of the house on the other side. We would want a camera survey before you burn in it, and in most of these houses the answer is a stainless liner rather than a rebuild.

It is the highest-value item in this trade for the money. A cap stops the rain that rusts your damper, the animals that block your flue and the embers that leave it, and a decent stainless one outlasts the roof it sits on. Almost every expensive chimney problem we are called to starts with water coming in at the top.

Chimney Caps and Crowns in Long Beach — Get Started Today

Homeowners across Los Angeles County keep our number in their phone for a reason. The line is answered around the clock — call and speak to someone who does this work.

Get In Touch

Request Your Free Quote

Available 24/7 for scheduling and emergencies. Reach out and we'll get right back to you.

Contact Details

5422 Autry Ave
Lakewood, CA 90712

Business Hours

MondayOpen 24 hours
TuesdayOpen 24 hours
WednesdayOpen 24 hours
ThursdayOpen 24 hours
FridayOpen 24 hours
SaturdayOpen 24 hours
SundayOpen 24 hours

Send Us a Message

Fill out the form and we'll respond promptly.

Protected by spam filtering